Description
1Using highbrightness SMD LED， high brightness， long life; highquality polymer lithium battery， charging times up to 500 times. 2With intelligent brake sensing function; highperformance acceleration sensor chip， sensitive response. 3Using digital constant current drive circuit， the brightness is constant. It meets the IP64 protection level and can adapt to various complex outdoor environments. 4Easy to install， lightweight and durable bicycle taillight， can be installed on all bicycles， children's bicycles， adult bicycles， handlebars， seatposts， dog collars or anywhere. 5It can also be used as helmet light， backpack light， warning light， etc.Condition: 100% brand newItem type:BikeTaillightMaterial:PC+Aluminum AlloyColor: blackSize: Approx. 39.5x29mm/1.6x1.1inWeight: Approx. 82gLamp beads: SMD LEDBattery: Rechargeable polymer lithium battery 380mAhBrightness: 20lmUsage time: 9 hours in fast flash mode， 56 hours in slow flash mode， 14 hours in meteor mode， 17 hours in Tai Chi mode， and 8 hours in breath mode.Tap the button to switch to five modes: fast flashing -> slow flashing -> Meteor -> Tai Chi -> Breathing Light， and so on.Turn on the light: In the OFF state， touch the switch and the light will light up. The mode is the mode before turning off the light last time.Turn off the light: Press and hold the switch for 1 second to enter the OFF state.Smart brake light mode:Double-click the button quickly to enter the smart brake mode， and the smart indicator will light up;In the smart braking mode， when the product senses that the bicycle is braking， all lights will enter the highlighted state to remind the following vehicles to pay attention. The highlighted state will last for three seconds;In smart brake mode， when the product senses that the bicycle is stationary for ten seconds， it will turn off all LEDs and enter the sleep state to save battery power. When it senses that the bicycle is moving again， it will return to the original lighting state of the product;In the smart brake mode， quickly double-click the button to exit the smart brake mode.Charging instructions:Open the waterproof rubber plug of the charging hole at the bottom of the product， insert the Mirco USB plug of the equipped charging cable into the charging hole， and insert the USB plug of the charging cable into any 5V USB charger (not standard);When charging is in progress， the button is displayed as a red breathing light. After charging is completed， the button is displayed as a steady red state;After charging， please plug the waterproof rubber plug of the charging hole back into the charging hole.Power indicator description:When the product is in use:The power indicator is off: power>10%;The power indicator is always on: power 99%.how to install:Step 1: Clip the silicone tape into the product back buckle;Step 2: Snap the silicone buckle into the silicone belt;Step 3: Press the silicone buckle on the bicycle seat tube with your fingers， and pull the silicone belt to the buckle with the other hand;The fourth step: Move the product to the rear to complete the installation.How to disassemble:Break the silicone buckle outwards to separate the silicone buckle from the silicone belt， and the disassembly is complete.1 x Bicycle tail light1 x USB charging cable1 x Soft glue buckle belt1 x Belt buckle1 x InstructionThe power consumption of the sleep state in the smart brake mode is greater than the OFF state of the product. When the product is not in use， please try to exit the smart brake mode before entering the OFF state.- Brand: Waoniq
- Category: Sport Safety Lights & Reflectors
- Fruugo ID: 185513976-395946880
- EAN: 542585640139
- Sold by: Shenzhenshishuerwenkejiyouxiangongsi
Comment