Description
1Lightweight and easy to carry， these accessories have high performance in accordance with strict regulations. 2The rope has an elastic stretch of 10m/32.8ft， these accessories are made of nylon and 304 stainless steel. 3The anchor is equivalent to the hand brake in a car， and it is an indispensable equipment to ensures the safety of the ship. 4Professional manufacturing， stable performance and high reliability. 5Suitable for marine， fishing boat， rubber dinghy， canoeing， kayak， etc.Condition: 100% brand newItem type:Marine AccessoriesMaterial: Stainless steel + nylonColor: As picture shownWeight: Approx. 240gAnchor casting methodShip anchoring is a common method of berthing. The process is roughly as follows: the ships anchor chain or cable is dropped into the water to land on the ground and bite into the soil. The holding force generated by the anchor is consolidated with the water bottom， and the ship is firmly anchored in the predetermined position. Different waters， meteorological conditions and operating requirements， and anchor casting methods are different. Commonly used methods include first anchor， tail anchor， and end anchor.1. The bow broke downThe bow is anchored， and there are two types: single anchor and double anchor. Under normal circumstances， a single anchor can be used to fasten the ship， anddouble anchors can be dropped when the wind and waves are particularly heavy and the anchorage is narrow. When the bow of the ship is anchored， the hull receives the least external forces such as wind force， current forceimpact force， so this method is the main method of anchoring and mooring， and it is also the main reason why the main anchor is arranged in the bow. Generally， there isone bow anchor on small boats and fishing boats. In addition， any ship is equipped with two main bow anchors at the bow. When the ship reaches a certain length， a spare main anchor， also known as windresistant anchor， should be provided on the ship.2. Anchor at the sternThe stern anchor is mostly used for inland watercraft and landing craft. When inland river vessels sail downstream and anchor down the water， in order to ensures safety and avoid turning around， the stern anchor is often used. In the operation of landing ships and retreating from the beach， with the cooperation of the main engine， the ship on the beach was pulled down the beach by the pulling force of the windlass.3. Anchor end and endIf you want to make the anchored shipuse the ship's side， when facing the wind direction， use the anchoring method. The method of anchoring heads and stern is generally to throw the main anchor from the direction of the wind， from the stern， pass a cable around the outboard of the ship and connect it to the thrown out main chain， and then release some main chain. Another method Yes， after the main anchor at the heads is thrown， the tail anchor is thrown from the tail. The stern anchor is usually transported and dropped by a small boat. The stern anchor is generally smaller than the main anchor， about 1/3 of the main anchor.4 x Saddle sheet8 x Countersunk internal hexM4x208 x forM4 nut2 x Metal pulley (No. 15)1 Bag x 3mm rope1 xTriangularbuckle1 x Nylon rope winding seat2 x Countersunk heads hexM6x462 x M6 nut- Brand: Waoniq
- Category: Fishing Rod Bags & Cases
- Fruugo ID: 186710194-398652819
- EAN: 463528306441
- Sold by: Shenzhenshishuerwenkejiyouxiangongsi
Comment